BLTCH - INDUSTRIAL ENAMEL, 139-1 WHITE

  • MSDS: BLTCH
  • Manufacturer: CORONADO PAINT CO
  • Product Name: INDUSTRIAL ENAMEL, 139-1 WHITE
  • National Stock Number: 8010-00N017725
Product Identification

Product ID:INDUSTRIAL ENAMEL, 139-1 WHITE
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017725
MSDS Number: BLTCH

Responsible Party
CORONADO PAINT CO
308 OLD COUNTY RD
EDGEWATER, FL 32032-1812
US

Emergency Phone: 904-428-6461

Info Phone: 904-428-6461 / FAX 904-427-7130

Cage: 33200

Contractor
CORONADO PAINT COMPANY, INC.
EDGEWATER, FL 32132-1812 US

Telephone: 904-428-6461

Cage: 33200

Ingredients

PIGMENTS

Fraction By Weight: 18.51%


VEHICLE

Fraction By Weight: 33.33%


AROMATIC HYDROCARBONS

Fraction By Weight: 48.16%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRYING OF SKIN, EYE IRRITATION.
EXCESSIVE INHALATION MAY CAUSE ANESTHESIA, HEADACHE, DIZZINES,
NAUSEA, UPPER RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, APPLY ARTFICIAL RESPIRATION IF
NECESSARY, CALL PHYS. SKIN: WASH WITH MILD SOAP AND WATER, APPLY A
MILD SKIN CREAM, IN SEVERE CASES CALL PHYS. EYE: FLUSH WATER FOR AT
LEAST 15 MIN, CALL PHYS. INGEST: CALL PHYS.

Fire Fighting

Flash Point Method:SCC
Flash Point:45.0F,7.2C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/NSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES WITH
AIR.

Accidental Release

Spill Release Procedures:WASH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ON AN APPROPRIATE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITION. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR
REPEATED PERSONAL CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:ABOVE TLV USE NIOSH/MSHA APPROVED CARTRIDGE
RESPIRATOR OR GAS MASK.
Ventilation:LOCAL EXHAUST: USE WHATEVER IS SUFFICIENT TO KEEP WORKROOM
CONCENTRATION BELOW TLV.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WWORKERS GOGGLES .
Other Protective Equipment:APRON, BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:235F,113C
Vapor Pres:23@68F
Vapor Density:3.2
Spec Gravity:1.138
Evaporation Rate & Reference:1.9(N-BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:WHITE OPAQUE LIQUID; PUNGENT AROMATIC ODOR.
Percent Volatiles by Volume:63

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND DIOXIDE.

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.